Home / Guides / How to fix plaster guides without cement
How to fix plaster guides without cement
Updated: November 2026 · 3 minute read
The old way means lumps of cement, waiting for them to dry, and corrections when the guide shifts. With the MIKEY clip the guide is fixed to the wall with a screw and levelled in real time. Here is how:
What you need
- MIKEY clips (each bag holds 100 clips and 100 screws)
- Plaster guides (2.60 m, or 10 mm and 3 m long)
- A drill or screwdriver, and a spirit level
The steps
- Clip onto the guide. Attach the clip to both sides of the guide, connector A and connector B, and lock it with a click. The PIN enters one of the holes in the guide so the clip cannot slide along it. No tools are needed.

Clips locked onto the guide - Screw the clip to the wall. Drive one screw per clip into the wall, through the screw track. On walls that need a dowel, drill and use a dowel suited to the type of wall.

One screw per clip - Level with a spirit level. Turn the screw with a screwdriver: in, and the guide moves closer to the wall; out, and it moves away. Check with a level until the guide is exactly in place, even after all the guides are already on the wall.

Turn the screw and level with a spirit level - Plaster as usual. When all the guides are level, plaster along them. There is no cement drying time to wait for before starting.

The result: a straight wall ready to paint
How many clips per guide
We recommend about 5 clips per guide, evenly spaced along its length. On uneven walls it is worth adding more. One bag of 100 clips covers about 20 guides. To calculate for your own wall: plaster guide calculator.
Why it is fast and accurate
- There is no need to wait for cement to dry, so you can start plastering right away.
- You can correct forward and back after the guide is already on the wall.
- It works on interior and exterior walls, concrete and blocks, and on ceilings.
Frequently asked questions
How long does it take to fix plaster guides with the clip?
Learning takes minutes. With the clip each guide is fixed and levelled without waiting for cement to dry.
Can I correct a guide after it is on the wall?
Yes. Turn the clip's screw and the guide moves forward or back until it is level.
Which walls does it work on?
Interior and exterior walls, concrete and blocks, and ceilings too.
How many clips do I need?
About 5 clips per guide, evenly spaced along its length. You can add more on uneven walls.
More on the method: clip or cement? · what is a plaster guide?
